Oil and Gas Metallics

Hello,

I'm attaching an Excel file where I input the Table A.2 contents as I BELIEVE they should appear.  I've also snipped A.2 from my 2023 copy of the standard to illustrate further what I BELIEVE to be formatting errors.  

Error 1 - S31603^b entry should have merged cells for the various conditions that limit its use

Error 2 - The 93 (200) entry should be in its own cell, and below the Temperature column.

I don't see any addenda, or comments in the maintenance panel web site that address this.

Hi Buddy,

Interesting catch.  Indeed the error is as you stated.  Looking at ISO15156-3 (4th ed. 2020), which is technically equivalent, S31603b is across all the 60 to 149 C rows and the 90 (194) is under the Temperature column as it should be.  I'll flag this to AMPP staff who should be able to address this through an additional Errata.

Thanks!

Hello,

I'm attaching an Excel file where I input the Table A.2 contents as I BELIEVE they should appear.  I've also snipped A.2 from my 2023 copy of the standard to illustrate further what I BELIEVE to be formatting errors.  

Error 1 - S31603^b entry should have merged cells for the various conditions that limit its use

Error 2 - The 93 (200) entry should be in its own cell, and below the Temperature column.

I don't see any addenda, or comments in the maintenance panel web site that address this.

Hello,

I'm attaching an Excel file where I input the Table A.2 contents as I BELIEVE they should appear.  I've also snipped A.2 from my 2023 copy of the standard to illustrate further what I BELIEVE to be formatting errors.  

Error 1 - S31603^b entry should have merged cells for the various conditions that limit its use

Error 2 - The 93 (200) entry should be in its own cell, and below the Temperature column.

I don't see any addenda, or comments in the maintenance panel web site that address this.

This is to advise you that AMPP has issued a corrected copy of ANSI/NACE MR0175-2021/ISO 15156:2020 including an errata sheet to correct a formatting error in Table A.2 in Part 3. It is available in the AMPP Store. Anyone who previously purchased the standard from AMPP will automatically receive the corrected copy in their Downloadable Products folder in their AMPP profile. If you purchased the standard from a reseller, please contact the reseller for a copy. 

This formatting error does not affect the technical use of the document. You may contact the SC 08 Staff Liaison, Rick.Southard@ampp.org , with any questions.

Thank you,

Hello,

I'm attaching an Excel file where I input the Table A.2 contents as I BELIEVE they should appear.  I've also snipped A.2 from my 2023 copy of the standard to illustrate further what I BELIEVE to be formatting errors.  

Error 1 - S31603^b entry should have merged cells for the various conditions that limit its use

Error 2 - The 93 (200) entry should be in its own cell, and below the Temperature column.

I don't see any addenda, or comments in the maintenance panel web site that address this.

Hi Shary

I am accessing ISO 15156-2020 through BSI membership. How can I access this page?

Thank you

This is to advise you that AMPP has issued a corrected copy of ANSI/NACE MR0175-2021/ISO 15156:2020 including an errata sheet to correct a formatting error in Table A.2 in Part 3. It is available in the AMPP Store. Anyone who previously purchased the standard from AMPP will automatically receive the corrected copy in their Downloadable Products folder in their AMPP profile. If you purchased the standard from a reseller, please contact the reseller for a copy. 

This formatting error does not affect the technical use of the document. You may contact the SC 08 Staff Liaison, Rick.Southard@ampp.org , with any questions.

Thank you,

Hello,

I'm attaching an Excel file where I input the Table A.2 contents as I BELIEVE they should appear.  I've also snipped A.2 from my 2023 copy of the standard to illustrate further what I BELIEVE to be formatting errors.  

Error 1 - S31603^b entry should have merged cells for the various conditions that limit its use

Error 2 - The 93 (200) entry should be in its own cell, and below the Temperature column.

I don't see any addenda, or comments in the maintenance panel web site that address this.